What you can observe
The damage may be related to movement, reinforcement, water or chemical load.
Problem guide · Concrete and structures
Concrete has cracks or moisture damage
Cracks, spalling, traces of rust or moisture escaping.
Problem · cause · effect
First understand what is going on.
Only then choose a system.
Why timely assessment helps
Een oppervlakkige coating zonder oorzaakanalyse kan de schade verhullen in plaats van beheersen.
What is being technically investigated
Investigate cause, active movement, reinforcement and environment before combining recovery and protection.
Possible causes
The visible complaint is not always the real cause.
These causes constitute a targeted checklist, not a remote diagnosis.
Cracking movement, water pressure or deterioration of reinforcement
Defective joints, penetrations or connections
Protective layer is not suitable for traffic, water or chemical loads
Project-specific control
Three components determine the correct next step.
The Problem Guide provides direction, but does not make an unfounded material claim. For a final system choice, we check the situation on location or based on sufficient project information.
- 01Cause, movement and moisture or water load
- 02Concrete condition, reinforcement, joints and penetrations
- 03Bereikbaarheid en constructieve context
Value of a complete approach
Don't just recover.
Making the project manageable.
- Investigate cause and water route before finishing
- Link recovery and protection within one technical scope
- Specify load, anti-slip and maintenance in advance
In-depth and evidence
From recognizable problem to verifiable project information.
Frequently asked questions
Answered briefly and technically honestly.
Can PolyShield immediately recommend a system?+
First, the cause, substrate, size and project context are checked. An appropriate system direction can then be substantiated.
What information helps with an initial assessment?+
Project address, general scope, some overview and detailed photos, building use and desired planning are usually sufficient to get started.
Do I have to re-enter all the data?+
No. Choices from the Problem Guide are automatically taken to the next tool and project request.
Short route to implementation
Check with two questions whether the project fits.
The project fit prevents an unnecessarily long application. Your problem situation is selected in advance and known data then travels automatically.