PolyShield Floor
Fast polyaspartic industrial floor
UV-stable, fast-responding 2K floor systems for indoors and outdoors, aimed at minimal downtime and project-specific confirmed recommissioning.
PolyShield performs this
Fast-track polyaspartic industrial floors
A wear-resistant floor with uni-colour, flakes, quartz or anti-slip within a short project-specific renovation window.
- 01Measure moisture, strength and existing layers
- 02Sanding, milling or blasting and repairing
- 03Apply primer and selected floor structure
- 04Check anti-slip, color and use
From damage picture to solution
Problem, cause and effect first visible.
- Mechanical traffic and point loads
- Chemical or thermal stress
- Moisture, poor adhesion or wrong choice of system
Damage spreads, cleaning becomes more difficult and production or traffic zones can fail.
Subsurface repair and a floor structure tailored to load, skid resistance and available downtime.
Business benefits
The value is not just in the new layer.
Less downtime
Assessing fast 2K routes for short renovation windows.
Safe use
Adjust friction and routing to the real work zone.
Lower maintenance burden
Achieving a closed, cleanable finish.
Representation
Use colour, flakes or quartz functionally and visually.
RISK OF DELAY
Continuing to drive over damaged areas can enlarge repair zones and make a later renovation moment more drastic.
First have the size, cause, accessibility and desired planning assessed. We then compare repair, renovation and, where necessary, replacement without selling a standard solution in advance.
Have project assessed →SUITABLE FOR
Business applications with a clear technical question.
- Warehouses and logistics
- Garages and workshops
- Shops, showrooms and operational business premises
System approach
Measure flatness, strength and moisture
Sanding, milling or blasting
Repair cracks and damage
Apply selected floor and anti-slip system
Application boundaries
Assess first.
Only then specify.
- Exclude rising damp in advance
- Determine load and cleaning regime
- Confirm commissioning time per system
Control profile
The division is broader than the application.
PolyShield assesses preparation, implementation and delivery as one coherent technical scope.
- 01Moisture and substrate strength
- 02Traffic and chemical loads
- 03Non-slip and commissioning
Can be processed quickly where responsible
Less downtime starts with the right system choice.
Where technically appropriate, PolyShield works with fast-reacting primers, two-component membranes and fast protective layers. The benefit lies not only in curing, but in a work plan in which preparation, recoating times and recommissioning are aligned in advance.
- 01
Polyaspartic and other fast-curing 2K systems for short renovation windows
- 02
Align work zones with logistics, production and desired reuse
- 03
Confirm curing, temperature and load in advance in a project-specific manner
Interactieve vloerselectie
Welke vloer past bij uw gebruik?
Kies eerst de omgeving en daarna de gewenste uitstraling. Dit is een technische voorselectie; ondergrond, belasting en uitvoeringsvenster bepalen de definitieve opbouw.
GESELECTEERDE RICHTING
Decoratieve flakes voor garages & werkplaatsen
Banden, olie, gereedschap en intensief dagelijks verkeer. Een representatieve, gemêleerde vloer met een transparante beschermlaag.
Rapid Series
One fast technology. Three clear floor choices.
The technology page remains the technical starting point. Then choose the finish that suits the appearance, load and desired grip.
PS Rapid Uni
Quiet uni color for warehouse, shop, garage and technical room.
View system structure →PS Rapid Flake
Representative flakes floor that practically camouflages signs of wear.
View system structure →PS Rapid Quartz
Fully broadcast quartz floor for wear, moisture and grip per zone.
View system structure →Premium fast-track floor technology
A complete business floor within a short execution window.
This aliphatic 2K polyurea, often referred to as polyaspartic flooring, combines fast response with UV stability, wear resistance and high mechanical resistance. This makes the technology interesting for indoor and outdoor floors where prolonged downtime is not an option.
The speed does not start with the final layer. Subsurface measurement, mechanical preparation, repairs, primer, work compartment layout and release to traffic together form the fast-track route.
Two variants, one system family
The location determines which route is suitable.
Regular fast-track variant
For indoor and outdoor floors where a very short drying and recoating time, mechanical resistance and UV exposure are key.
- Short application and overlay windows
- Suitable for exposed floor areas
- Project specific chemical resistance
- Application at lower temperatures possible within product specification
Low-odor variant
For shops, supermarkets, warehouses and limited ventilated areas where solvents and odor pollution require extra attention.
- Solvent-free system direction
- Limitation of odor pollution
- Same focus on rapid recommissioning
- Ventilation and working conditions remain part of the work plan
Business applications
Built around use, not a product name.
Warehouses and logistics
Wear-resistant renovation for foot traffic, internal transport and zones that must be available again quickly.
Garages and workshops
UV-stable and mechanically strong finish, with chemical load and anti-slip pre-determined.
Shops and showrooms
Short renovation windows, color stability and a representative finish for commercial spaces.
Washing and service locations
System selection based on water, cleaning agents, oil load, drainage and desired skid resistance.
Exterior floors
Aliphatic system direction for UV and weather exposed areas, provided the surface and detailing are suitable.
Sensitive indoor locations
Solvent-free, low-odor variant for locations where emissions, odor and ventilation are extra important.
Indicative fast-track route
From recording to reuse.
A floor can be constructed in a very short window under appropriate conditions. The final planning will only follow after a test area, moisture measurement and selection of the complete system variant.
- 01Measure and prepare
Check moisture, tensile strength, cracks, loads and existing layers; then sanding, milling or blasting.
- 02Repair and prime
Repair weak areas and adjust the primer to the substrate, temperature and subsequent layer.
- 03Build up a 2K wearing layer
Control mixing, consumption, recoating time, color and any anti-slip per work area.
- 04Check and release
Only release the floor to traffic after project-specific confirmation of the chosen variant and circumstances.
Technical selection
This data determines the floor structure.
01Substrate strength and residual moisture02Internal or external tax03Vehicles, point loads and wear and tear04Chemicals and cleaning regime05Desired anti-slip and appearance06Temperature and available working window07Ventilation, odor and emission requirements08Moment of full recommissioning
Deepen per finish
From appearance to a well-founded system structure.
DECORATIVE & BUSINESS
Flakes floor for companies
Discover color mixes, transparent seal layers, maintenance and applications for garages, showrooms and commercial spaces.
View flake floors →STRONG & HEAVY LOADEDAnti-slip industrial floor with colored quartz
See how grain size, spreading, sealing layer and cleaning together determine the correct skid resistance and load capacity.
View quartz floors →MINERAL & UV STABLEStone carpet for business outdoor areas
Transparently bonded natural stone or quartz mixes for entrances, terraces, stairs and representative outdoor areas.
View stone carpet →NATURAL & PREMIUMNatural Granite Finish
Real mineral granite granules as an exclusive finish above a technically suitable fast 2K floor platform.
View granite floors →
Our project evidence
Garage floor designed as one controlled use zone.
Approximately 60 m² of polyaspartic flooring with a consistent texture and integrated upstand.
- Approx. 60 m²
- Polyaspartic
- Garage
Project information
Substrate, surface, details, known damage, load, accessibility and desired planning.
System direction
Primer, repair, main coat, detailing, anti-slip or finish are chosen as a coherent structure.
Checkpoints
Conditions, consumption, layer structure, photos and project-specific residual and maintenance points.
Applications within this division
Explore the project question.
PolyShield Floor
Renovate industrial floor
Repair damaged or worn floors and make them usable again.
View application ↗PolyShield FloorFast business floor
An implementation plan aimed at a short, pre-agreed business interruption.
View application ↗PolyShield FloorEpoxy floor for commercial properties
Strong and maintainable floor finish for controlled indoor conditions.
View application ↗PolyShield FloorFlakes floor for companies
Decorative, wear-resistant fast-track industrial floor with color flakes and transparent protective layers.
View application ↗PolyShield FloorAnti-slip industrial floor with colored quartz
Fully broadcast floor system in which skid resistance, wear resistance and cleanability are balanced project-specifically.
View application ↗PolyShield FloorStone carpet for business outdoor areas
UV-stable, transparent bonded stone carpet for representative terraces, entrances, stairs and commercial outdoor areas.
View application ↗Related expertise
Applicable to technology, evidence and decision-making.
These next steps are linked to application, substrate, risk and decision phase. This way you navigate from general information to technology, evidence and a useful project route.
Application
Polyaspartic bedrijfsvloer Delft
Fast-track vloeren voor garages en bedrijfsruimten.
View this route →ProjectPolyaspartic flakesvloer in bedrijfsruimte
Naadloze meerkleurige flakesafwerking met verzorgde randdetails.
View this route →ApplicationLogistieke bedrijfsvloer Schiphol
Snel uithardende vloerrenovatie afgestemd op rijroutes, grip en korte stilstand.
View this route →ToolPolyShield System Configurator
Translate building part, subsurface, priority and planning into a transparent first system direction.
View this route →TechnologyCentral guide cold applied 2K polyurea
From target group and four-layer system structure to comparison, boundaries, project evidence and business next step.
View this route →ProjectPolyaspartic garage floor of approximately 60 m²
Snelle naadloze garagevloer met fijne structuur en opgezette plint.
View this route →