What you can observe
Moisture settles on cold metal surfaces and can drip onto goods, installations or work areas.
Problem guide · Facade, metal and spraying
Condensation is forming in my industrial hall
Drip formation against metal roof or wall panels.
Problem · cause · effect
First understand what is going on.
Only then choose a system.
Why timely assessment helps
Persistent condensation can cause corrosion, contamination, product risk and unsafe working conditions without causing a roof leak.
What is being technically investigated
Investigate indoor climate, ventilation, temperature difference, insulation and condensation moments and then determine whether climate measures, insulation or an absorbent anti-condensation coating are part of the solution.
Possible causes
The visible complaint is not always the real cause.
These causes constitute a targeted checklist, not a remote diagnosis.
Warm moist air hits a cold metal surface
Ventilation and air distribution do not correspond to the use
Insulation is missing, broken or insufficiently functioning
Project-specific control
Three components determine the correct next step.
The Problem Guide provides direction, but does not make an unfounded material claim. For a final system choice, we check the situation on location or based on sufficient project information.
- 01Material, existing coating and degree of repair
- 02Accessibility, shielding and environmental risk
- 03Application method, phasing and desired appearance
Value of a complete approach
Don't just recover.
Making the project manageable.
- First distinguish between leakage and condensation
- Targeted recording of risk zones and moments of use
- Only use coating where absorption capacity and climate conditions are appropriate
In-depth and evidence
From recognizable problem to verifiable project information.
Frequently asked questions
Answered briefly and technically honestly.
Is condensation water the same as a roof leak?+
No. Condensation forms on the surface due to temperature and humidity; a leak is caused by water ingress from outside.
Can coating stop all condensation?+
No. The coating can temporarily absorb moisture and release it later, but climate, ventilation and capacity remain decisive.
Why a scan first?+
Because time of day, use, temperature and ventilation are necessary to recognize the dominant cause.
Short route to implementation
Check with two questions whether the project fits.
The project fit prevents an unnecessarily long application. Your problem situation is selected in advance and known data then travels automatically.